Exterior Wall Paint Marble texture finish Quick 72 Hour Shaping bucket 50kg for 25 square meters 2 coats home decoreation
Description
Elevate Architecture with Timeless Marble Beauty, Built to Last
Marblelike redefines exterior elegance. With 95% simulation of natural stone, this coating brings the luxury of marble to any facade while ensuring the finish withstands decades of environmental exposure.
Feature
-
Lifelike Aesthetics, Unmatched Endurance: Maintains its rich texture and color integrity under intense sun, heavy rain, and dusty winds.
-
Healthy & Safe: Free from harmful emissions, contributing to better air quality and occupant well-being.
-
Versatile & Fast: Applicable on diverse surfaces and shapes, with quick curing to keep projects on schedule.
Specification
| Product model |
LWZA004 |
| Product type |
Exterior wall paint Marblelike |
| Main material |
acrylic resin；Quartz Sand |
| Appearance |
Colored viscous liquid |
| State |
No lumps, uniform after stirring |
| Solid content |
65%±2% |
| Density |
1.8g/ml±0.05% |
| Color |
Colored |
| Gloss |
≤60° |
| Contrast ratio |
≥0.95 |
| Alkali resistance (24 h) |
No abnormality in coating |
| Stability(-5C) |
No degradation |
| Scrubbing resistance |
≥6000 times |
| Constructability |
No obstacles in applying two coats |
| VOC |
Below the detection limit |
| Formaldehyde content |
Below the detection limit |
| Total content of benzene series |
Below the detection limit |
| Total lead (Pb) content |
Below the detection limit |
| Soluble heavy metal content |
Below the detection limit |
| Pigment |
Lead-free pigment |
| Solvent type |
Water-based |
| Theoretical coverage |
2-2.5KG/1㎡/2 times |
| Dilution ratio |
Do not dilute with water |
| Drying time |
Surface drying time ≤4h |
| Maintenance time |
7 days/25℃, extended at low temperatue (not less than 5℃) |
| Implementation standard |
JG/T24-2018 "Synthetic Resin Emulsion Texture Coating (for Architecture)" |
| Product specification |
30KG/barrel；50KG/barrel |
| Shelf life |
24 months |
| Storage |
Store in a sealed, cool and dry place at 5℃~35℃, prevent frost and avoid sunlight. |
| Construction methods |
Spray painting |
| Water Absorption(2h)/g |
≤0.3 |
| Water Resistance |
96h No abnormality in coating |
| Adhesion Strength/MPa(After 5 freeze-thaw cycles) |
≥1 |
| Artificial Weathering Resistance |
600h No cracking；No blistering； No delamination in coating； No delamination Level 0； Color Change Level 0 |
Application Scenarios of Marble texture Exterior Wall Paint
High-profile residential, hospitality, and cultural projects—from luxury villas in the GCC to resort hotels in Southeast Asia—where first impressions and lasting performance are non-negotiable.
Use method
Base leveling: It is advisable to use exterior wall putty with high particle fineness, hard texture, strong adhesion, waterproof and alkali resistance; exterior wall putty needs to be mixed on site, and the ratio of putty powder and water should be strictly controlled according to the product instructions; during the preparation of putty, it should be stirred evenly to ensure that there are no powder lumps, no lumps, no oversized particles and moderate viscosity; apply the prepared putty 1-2 times, and the prepared putty should be used up within 2 hours, so that it can be used immediately after preparation; the second coat of exterior wall putty can only be applied when the previous coat of exterior wall putty is completely dry.
Alkali-resistant primer: The primer can be used directly after being stirred evenly. If it needs to be mixed, the dilution ratio should be strictly controlled according to the product instructions, and excessive dilution is strictly prohibited; the prepared primer should be evenly rolled with a roller once, and a brush should be used to assist in the construction of corners and gaps. The coating surface should have a uniform gloss and no missing coating.
Finishing decoration: Marble paint can be used directly after being stirred evenly. If it needs to be mixed, the dilution ratio should be strictly controlled according to the product instructions; spray the prepared real stone paint twice with a special spray gun, and the re-coating interval should be greater than 4h. The spraying should be full, with consistent texture, not transparent, and not flowery.
Surface protection: Special surface paint can be used directly after being stirred evenly. If it needs to be mixed, the dilution ratio should be strictly controlled according to the product instructions, and excessive dilution is strictly prohibited; Roll the prepared surface paint evenly with a roller once, and use a brush to assist in the construction of corners and gaps. The thickness should be uniform and consistent, and there should be no missing paint.
Product Tags:
|
|
Exterior Wall Paint Marble texture finish Quick 72 Hour Shaping bucket 50kg for 25 square meters 2 coats home decoreation Images
|
